Search Latest topics | Compressibility of Airflow and Mach Number Mon Jan 18, 2010 6:33 pm by Admin These notes have little value for the (recreational aviator), but are included for interest. Professional pilots however will study this. Except for a slight EAS correction to IAS/CAS, and the possible propeller effects, the compressibility/elasticity of airflow (i.e. the density change resulting from pressure disturbances) does not have any significant airframe aerodynamic effects for aircraft operating at velocities below about 250 knots TAS. Pressure disturbances, or waves, propagate through the atmosphere in all directions, at the speed of sound. Mach 1.0 is the notation for the speed of sound. For aerodynamic purposes airflow speeds are classified within five ranges: Hypersonic flow — airflows greater than Mach 5.0 Supersonic flow — airflows between Mach 1.5 and Mach 5.0 Transonic flow — airflows between Mach 0.8 and Mach 1.5 Subsonic flow — airflows between Mach 0.3 and Mach 0.8 Incompressible flow — airflows below Mach 0.3 The term 'incompressible flow' doesn't mean that air is incompressible; it just indicates that at flow speeds below Mach 0.3 (30% of the speed of sound or about 200 knots TAS), local density variations within the flow — due to compressibility — are insignificant; so aerodynamicists can assume constant density within the flow. At subsonic velocities, significant density changes may occur in the airflow around wings, which will produce flow separation and a turbulent wake — wave drag. The associated drag coefficient builds rapidly at airspeeds above Mach 0.75 then reduces as Mach 1.0 is exceeded. The speed of sound in the atmosphere varies with air temperature. The Mach number is the measure of an aircraft's TAS in relation to the ambient speed of sound. For example, Mach 0.6 indicates that the aircraft's true airspeed is 60% of the speed of sound. The speed of sound is proportional to the square root of the absolute temperature. In the ISA, Mach 1.0 at sea level = 663 knots, and temperature at sea level = 15 °C [288 K]. Thus, if the temperature = −36 °C (237 K) then the ambient Mach 1.0 = 663 × √237/√288 = 601 knots. Thus, Mach 0.60 at 15 °C would be 398 knots TAS, while Mach 0.60 at −36 °C would decrease to 360 knots TAS. Below the tropopause — the speed of sound decreases as altitude increases. A machmeter is an instrument that measures and compares the speed of the aircraft and the speed of sound, using the outside air temperature. It adjusts for actual air density but is still subject to the same position errors as the ASI. The machmeter is usually incorporated within an ASI; the numeric Mach appears in a small window within the ASI dial. You may see references to design diving speed presented as 'Vd/Md' which indicates the speed may be expressed as IAS or Mach number. Other reference airspeeds are presented in similar fashion. For interest, the following table is the maximum permissable speed/altitude for a late 1940s/early 1950s piston-engined naval fighter — the Seafire 47: Altitude feet Max. IAS knots Mach no. Approx. TAS Sea level – 10 000 455 0.78 505 10 000 – 15 000 410 0.78 495 15 000 – 20 000 375 0.78 485 20 000 – 25 000 340 0.78 472 25 000 – 30 000 300 0.78 459 30 000 – 35 000 270 0.78 448 35 000 + 240 0.78 432 Subsonic jet transport aircraft are designed to cruise close to their maximum allowable speed — Vmo/Mmo. Vmo is the limiting indicated airspeed and Mmo is the limiting Mach number. Mmo is probably between Mach 0.80 and Mach 0.85. In normal operations the limiting airspeed is Vmo, up to a change-over pressure altitude (perhaps around 25 000 feet). Above this altitude Mmo becomes the limiting speed value because of compressibility problem restraints. Vmo could be shown as a fixed red line on the ASI (or 'Mach/Airspeed Indicator') but, because the speed of sound decreases as altitude increases, Mmo can't be represented by a fixed marking on the indicator. So, a moving red-and-white striped pointer, the 'barber pole', shows the limiting Vmo/Mmo varying with altitude. It shows the IAS corresponding to the lower of Vmo or Mmo for the current altitude. All information here is fully accredited to http://www.auf.asn.au/index.html at http://www.auf.asn.au/groundschool/flutter.html#mach Comments: 0 | Statistics We have 42 registered usersThe newest registered user is flychem Our users have posted a total of 119 messages in 96 subjects Who is online? In total there are 2 users online :: 0 Registered, 0 Hidden and 2 Guests None Most users ever online was 25 on Wed Mar 01, 2023 2:02 pm |
|
|
Sat Apr 06, 2013 12:57 pm by timdejager
» renew cna certification
Sat Jul 30, 2011 6:20 am by Guest
» LET S RE ACTIVATE THIS FORUM
Fri Nov 05, 2010 7:51 am by Kerveras Andreas
» Challenge Questions PPL Sec 1.
Mon Mar 15, 2010 12:15 pm by Kerveras Andreas
» Challenge Questions PPL Sec 1.
Sun Feb 21, 2010 5:14 am by Admin
» Challenge Questions PPL/CPL Sec 5.
Tue Feb 09, 2010 6:44 am by Admin
» Altitude & Q Code Defenitions
Mon Jan 18, 2010 6:36 pm by Admin
» Document and Chart DescriptionsShare
Mon Jan 18, 2010 6:34 pm by Admin
» Compressibility of Airflow and Mach Number
Mon Jan 18, 2010 6:33 pm by Admin